The Chinese-made wireless par light can be controlled through DMX512, wireless DMX512, infrared remote control (or radio frequency remote control), and WIFI (we have both Chinese and English interfaces). It can fully meet the needs of professional users and amateur players.

A DMX controllers is a device that allows you to control lights and other devices such as fog machines in performance settings. It sends information down to the lights and can be a desk, console or playback machine. DMX stands for Digital Multiplex

DMX controllers is a device that controls DMX-enabled lights. It works by sending commands over a DMX cable to the lights, telling them what functions to perform. The controllers can be programmed to control multiple lights at once, allowing for complex light shows. For example, controllers might be used to make the lights spin, move in a certain pattern, or change colors. DMX controllers typically has several faders, knobs, and buttons that can be used to control different functions of the lights.

Yes, you can use DMX lights without controllers. However, you will need a DMX decoder to translate the signals from the controllers into a format that the lights can understand. There are also DMX control software that provide sophisticated features for controlling your lights.

You can control DMX lights from a computer using a DMX dongle or interface that lets you connect your computer to your DMX lighting system. There are also free apps that allow you to design and preview light shows on your computer.

Some popular brands of DMX controllers include American DJ, Chauvet, Enttec, Behringer and Rockville.

The cost of a DMX controller can vary greatly depending on its intended use and features. They generally aren’t expensive but can range anywhere from $19 to $6667 and up.

When choosing a DMX controllers, you should consider several factors such as its intended application, compatibility with your existing gear, feature set and functions you need, ease of use, size and noise level. You should also consider your budget.

To connect DMX controllers, you need to connect the power to your DMX controllers and fixtures. Then, connect a DMX cable from the DMX controllers to the DMX IN of the first fixture and a DMX cable from the DMX OUT of the first light to the DMX IN of the second. Set both lights to DMX channel mode.