800W 10x60W RGB LED Moving Head Matrix Beam Wash Zoom Stage Light (GL-SW1060)

Next-Gen Performance | 800W Professional LED Moving Head

Meet the new backbone of your lighting rider. Designed for elite lighting designers and high-intensity production rental, this premium LED Moving Head delivers unmatched brightness and rich RGB color mixing that commands attention.

Why It Dominates the Stage:

2.8°–31° Precision Zoom: Flawless transition from tight mid-air beams to wide, immersive wash effects.

Advanced Node Matrix: Integrated RJ45 plus 3-pin & 5-pin XLR data links for flawless network stability.

Intelligent RDM Control: Real-time remote monitoring and smart feedback via DMX512 across advanced channel modes.

AT A GLANCE

High-Output 800W RGB LED Engine
Delivers massive, high-density light output with smooth, vibrant RGB color mixing. Engineered specifically to cut through large-scale professional stages, concert tours, and high-end entertainment venues.
Ultra-Wide 2.8° to 31° Linear Zoom
Features a high-precision optical system providing a seamless transition from a razor-sharp, punchy aerial beam to a wide, immersive color wash at the beam end for maximum visual versatility.
Pro-AV Hybrid Connectivity (RJ45 & XLR)
Equipped with dual RJ45 network nodes alongside professional 3-pin and 5-pin XLR signal inputs/outputs, ensuring flawless, low-latency data routing in complex matrix rigs.
Intelligent DMX512 & RDM Protocol Support
Enables robust bidirectional communication for real-time remote device management (RDM). Allows for instant fixture addressing, status feedback, and software upgrades directly via the DMX connection.
Versatile Multi-Channel Pixel Configurations
Supports massive channel layouts ranging from 17 CH up to 170 CH (including specialized 8+100 and 8+160 CH modes), offering lighting designers deep pixel-mapping control for intricate stage programming.

Specification

Input Voltage：AC100-240V, 50-60Hz
IP Rating:IP33
Emitting Color:RGB
Light Source:LED
Power Consumption:800W
Power Socket:Power connector input/output
Signal Input/Output:3-pin or 5-pin XLR connector, RJ45

Control Buttons:5 buttons
Control Panel:LCD Display
Control Protocol：DMX512, RDM
Channel Modes：17/27/99/108/168/8+100/8+160/170 CH
Software Upgrade：Via DMX connection
Beam Angle：2.8°-31° (at beam end)

VIDEO

Frequently Asked Questions

Q1: Does this high-power LED Moving Head support RDM and network control?

A: Yes. This professional LED Moving Head fully supports both DMX512 and RDM protocols, enabling stable bidirectional communication for real-time remote device management and fixture addressing. For versatile signal routing in complex rigs, it is equipped with integrated RJ45 network nodes alongside standard 3-pin and 5-pin XLR inputs and outputs.

Q2: What is the zoom capability and beam angle range of this fixture?

A: The fixture features a high-precision motorized optical system delivering a linear zoom range from 2.8° to 31° (measured at the beam end). This wide flexibility allows lighting operators to seamlessly morph the output from a piercing, high-density aerial beam to a broad, immersive color wash during live staging.

Q3: How many DMX channel modes are available for pixel programming?

A: To accommodate various lighting console profiles and programming complexities, the fixture offers a massive selection of channel configurations. Operators can select from 17, 27, 99, 108, 168, and 170 CH modes, as well as specialized 8+100 CH and 8+160 CH modes tailored for advanced pixel-mapping and intricate matrix designs.

Q4: Can this 800W lighting fixture be used for outdoor staging?

A: This fixture carries an IP33 rating, meaning it is protected against solid objects over 2.5mm and direct sprays of water up to 60 degrees from vertical. It is highly optimized for indoor professional stages, theaters, and concert venues. For temporary outdoor events, it must be paired with appropriate rain covers or overhead truss protection.

Q5: What are the power requirements, and how is the software updated?

A: The unit operates on a universal input voltage of AC100-240V (50-60Hz) with a maximum power consumption of 800W. It utilizes heavy-duty power connector inputs/outputs for secure daisy-chaining. For long-term maintenance, firmware and software upgrades can be deployed efficiently directly via the DMX connection.