IP65 7x60W Wash LED Moving Head with Pixel Effects (GL-LW760)
One Fixture. More Ways to Shape the Show.
Built for stages that change with the music, this Wash LED Moving Head shifts from a focused beam to a wider wash. Use the tighter angle to punctuate a cue, then broaden the light as the scene opens up. An RGB auxiliary layer adds chase and strobe accents, bringing a second visual rhythm to the main light.
Open-air flexibility — Its IP65 rating supports outdoor stage use when installed with suitable connections.
Make each cue your own — Individual LED control and built-in programs help create distinct looks without adding another effect fixture.
From festival stages to club sets, it brings movement, color and texture into one lighting position.
AT A GLANCE
Specification
VIDEO
Frequently Asked Questions
Q: Can I use this Wash LED Moving Head outdoors?
A: Its IP65 rating provides protection against dust and water jets, making it suitable for outdoor stage use. Power and data connections must also be appropriately protected. IP65 does not cover immersion in water.
Q: Can it produce both beam and wash effects?
A: Yes. The fixture supports beam and wash effects with a specified angle range of 6.5°–45°. This gives you options for focused aerial effects and broader stage lighting from the same fixture.
Q: Do I need a DMX console to operate it?
A:No. Auto-run and sound-activated modes allow operation without a DMX console. Master/slave mode supports coordinated operation between fixtures. For programmed shows, DMX512 offers 37-, 49- and 65-channel modes.
Q: Can I control individual LEDs and create chase effects?
A: The main light supports single-bead pixel control for more detailed programming. The auxiliary RGB LEDs provide built-in chase and strobe effects, adding another visual layer. Individual control of every auxiliary LED has not been specified.
Q: Does the 7 × 60W LED configuration mean it only uses 420W?
A: The 420W figure is the combined wattage of the seven main LEDs. The complete fixture has a specified maximum power consumption of 600W. Use the 600W figure when planning electrical capacity for your rig.





